-
Recent Posts
- Solar Thermal Tube testing
- Ruby v1.0b
- Ruby v1.0a
- Radios!
- Drilling the Marineland 300DD
- RF Interference
- Eflite 120mAh test done!
- Testing the Eflite 120mAh battery with a minimal jeenode
- Reading Lipo Voltage
- Reading the ARSSI pin on the Si4221/HopeRF 12B
- DHCP on the ENC28J60
- Silicon Labs’ RF chips
- RF12 packet loss
- RF12B Antenna length/type
- RF12B Modules…time to switch frequency?
Archive
- September 2011 (2)
- August 2011 (1)
- July 2011 (3)
- June 2011 (6)
- May 2011 (14)
Recent Comments
Archive for June, 2011
-
Eflite 120mAh test done!
Posted on June 28, 2011 | 2 CommentsSo a few days ago, the Jeenode stopped sending data. The beginning of this test can be found in this post. It stopped after sending 15,200 data points. That is... -
Testing the Eflite 120mAh battery with a minimal jeenode
Posted on June 17, 2011 | 4 CommentsI want to build some small wireless sensor nodes that run off small LiPo batteries and use small solar cells to charge the battery. I found some small LiPo batteries... -
Reading Lipo Voltage
Posted on June 15, 2011 | 1 CommentI’m testing a mini LiPo battery to see how long it will power a Jeenode. I bought this battery: It is listed as a 3.7V, 120mAh 1S 14C LiPo battery.... -
Reading the ARSSI pin on the Si4221/HopeRF 12B
Posted on June 14, 2011 | 2 CommentsThe Si4221 has a digital received signal strength indicator (RSSI). You can set a threshold in the configuration and the pin will go low when that threshold has been broken.... -
DHCP on the ENC28J60
Posted on June 7, 2011 | No CommentsExciting news! Andy has created a new library for Arduino that includes DHCP. JCW has got it working on Jeenodes it appears. Follow it here. Code is available on Github... -
Silicon Labs’ RF chips
Posted on June 6, 2011 | 1 CommentJust a few notes about Silicon Labs chips and HopeRF modules. All the info is in the datasheets or online, but I like to keep use the blog to keep...